In these photos, you can see a crawlspace that is being treated for mold. Once the mold treatment was complete and the surfaces were thoroughly scrubbed, the debris was rolled in black plastic and removed from the crawlspace. Then, new black plastic was laid along the floor for the second phase of mold treatment. Once that is complete, the black plastic will be removed again and CleanSpace will be installed. Before the CleanSpace is adhered to the walls, the homeowners elected to insulate their crawlspace foundation walls with SilverGlo!
In these two pictures, you can see the bare foundation walls had been covered with backerboard sheets, which are very low R-rating for insulation. In the After picture, you can see the shiny surface of the SilverGlo! Not only is it an R11 rating, but it's complete with the shiny layer to reflect back heat/cool into the crawlspace. Once the crawl space system, complete with CleanSpace, is installed, the homeowners will notice energy efficiency and savings!